Productos > LDS > Fusion3D 1200

LPKF Fusion3D 1200

LPKF Fusion3D 1200

Flexible and efficient Production of 3D molded interconnect devices

Usted se encuentra aquí: Productos > LDS > Fusion3D 1200
The LPKF Fusion3D 1200 laser system has been developed as a flexible solution for a broad range of requirements for the laser direct structuring. Equipped with a rotary indexing table, small, medium and large series of 3D molded interconnect devices (MID) can be produced in a particularly economical fashion.

With different laser processing units, an optional vision system and optional turning devices on the rotary indexing table, the system can be adapted to the end customers layout and performance requirements.

Less non-productive time, easier loading

The integrated rotary indexing table reduces non-productive times: While a component is being processed, another one can already be loaded or unloaded. Each table side can handle a separate project. Thanks to the height control of the rotary indexing table, manufacturing errors during project changes can be prevented.

Both table sides feature four separate I/O ports and can be supplied with vacuum and compressed air. A light barrier provides an active access protection.

The modular laser concept allows the Fusion3D platform to be equipped with several processing units (PU). A maximum of three PUs can work simultaneously and thereby guarantee short cycle times.

LPKF Fusion3D 1200
LPKF Fusion3D 1200 with rotary indexing table and vision system
LPKF Fusion3D 1200 structuring area
Structuring area up to 200 mm x 200 mm x 80 mm
Laser Direct Structuring of a 3D-MID
Laser Direct Structuring of 3D MIDs with up to three processing units

3D MID (Molded Interconnect Device)
Finger tips for a robot hand (Source: Citec, Bielefeld University)


Technical Data
Datos técnicos: Fusion3D 1200
Clase de láser 1
Zona de estructuración (X/Y/Z) 200 mm x 200 mm x 80 mm  o
100 mm x 100 mm x 40 mm
Número de cabezales láser 1-3
Precisión* ± 25 μm
Velocidad de estructuración máx. 4 000 mm/s
Formato de datos IGES, STEP
Software LPKF CircuitPro3D
Longitud de onda láser 1 064 nm
Frecuencia de impulso láser 10 kHz - 200 kHz
Dimensiones del sistema (ancho/alto/profundo) 956 mm x 1 880 mm x 1 642 mm
Peso aprox. 675 kg **
Dats técnicos de funcionamiento
    Suministro eléctrico 400 V, 3L + N + PE, 16 A, 50/60 Hz, ~ 2.2 kVA
    Refrigeración Refrigeración por aire
    Temperatura ambiente 22° C ± 2,5° C
    Humedad del aire máx. 60 %
Unidad de succión Requerido; disponible como una opción
Materiales de las piezas (selección) Níquel, cobre, acero inoxidable, plástico SUD, LDS polvo o pinturas en spray, pasta de oro y plata, cerámica, estaño

* Calibrated scanfield
** Including 3 Processing Units (PU), ecluding exhaust unit

Sitios Grupo
LPKF WeldingQuipment
LPKF SolarQuipment
ZelFlex Stretching Frames