Productos > Tecnología de placas de circuito impreso > MicroLine 5000

Menu
LPKF MicroLine 5000

LPKF MicroLine 5000

UV Laser System for Laser Drilling and Contour Cutting

Usted se encuentra aquí: Productos > Tecnología de placas de circuito impreso > MicroLine 5000
 
General
The MicroLine 5000 is a laser drilling and cutting system specifically tailored to the needs of the flexible circuit industry. With the ability to drill holes down to 20 μm, a variety of both organic and inorganic substrates can be processed such as:
  • Flexible PCBs
  • IC substrates
  • High Density Interconnect PCBs

Common applications of the laser drilling machine include through holes and blind vias, with the additional ability to cut large mounting holes, or full perimeter cuts of irregular board contours.

Quality and Precision

The high-quality attributes of the UV wavelength allow for the laser drilling and cutting of delicate materials with minimal heat affected zone - and the proof is in the results: clean side-walls with precise dimensions and virtually zero debris. Available with either a 10 W, 15 W or 27 W laser source, the MicroLine 5000 series may also be configured to work with various material handling options.

Contour Cutting

The MicroLine 5000 UV laser is a universal tool - and thus suitable for cutting all industry-standard panel sizes with dimensions of up to 533 mm x 610 mm (21” x 24”). The 20 μm high quality UV laser kerf width allows for cutting of even the most delicate contours at high speeds.

Process Monitoring

The MicroLine 5000 systems are equipped with an integrated vision system for fast fiducial recognition, ensuring accurate alignment. The camera’s ability to use virtually any board feature as a fiducial alignment point provides operator flexibility from job to job.

Pictures
LPKF MicroLine 5000 Sideview
MicroLine 5000 UV laser drilling and cutting system
LPKF MicroLine 5000
Large working area of 533 mm x 610 mm (21” x 24”)
Integrated vision systems for fast fiducial recognition
30 μm Through Hole
30 μm through hole in a double-sided FPC substrate
30 μm Blind Via
30 μm blind via in a double-sided FPC substrate


Video


Video LPKF MicroLine 5000 - Laser Processing of Flex PCBs



Technical Data
LPKF MicroLine 5000
Laser class 1
Max. working area
(X x Y x Z)
533 mm x 610 mm x 11 mm
(21” x 24” x 0.43”)
Max. sheet size;
max. reel width
533 mm x 610 mm (21” x 24”);
500 mm (19.6”)
Position accuracy ± 20 μm (0.8 Mil)
Diameter of focussed laser beam 20 μm (0.8 Mil)
Laser wavelength 355 nm
System dimensions
(W x H x D)
1 660 mm x 1 720 mm x 1 900 mm
(66” x 68” x 75”)*
Weight ~ 2 000 kg (~ 4 400 lbs)
Operating conditions
Power supply 400 VAC, 3-phase, 50-60 Hz, 16 A, 6.5 kVA
Cooling Air-cooled (internal water-air cooling)
Ambient temperaturey 22 °C ± 2 °C (71.6 °F ± 4 °F)
Compressed air 130 l/min @ 0.6 MPa, air quality ISO 8573-1:2010, class 6.4.4
Required accessoires Fume extraction and filtration unit


* Height incl. StatusLight = 2 200 mm (87”)

MicroLine 5000 systems feature multiple variations:
MicroLine 5120 (10 W laser source), MicroLine 5820 (15 W laser source) and MicroLine 5000 (27 watt laser source).

Brochure LPKF MicroLine 5000 Series
PDF download

More Information



Sitios Grupo
LPKF WeldingQuipment
LPKF SolarQuipment
LaserMicronics
ZelFlex Stretching Frames

Distribuidor
Europa
América
Asia
África
Australia
English
Deutsch
Français
Русский
Slovenščina
日本語
中文
LinkedIn 
Facebook 
Twitter 
YouTube 
<